JUAL V TYPE MIXER

JUAL V TYPE MIXER

SPESIFIKASI	DESKRIPSI	KUANTITI
Power Source	Gear motor, 3 Phase 2 HP, Speed 20 rpm.	–
Capacity	500 kg.	–
Dimensions (l x w x h) >	120 cm x 110 cm x 220 cm.	–

JUAL TRIAXIAL TEST SET

JUAL TRIAXIAL TEST SET 

Deskripsi

TRIAXIAL TEST SET, Digital reading pore pressure 

RS-600 TRIAXIAL TEST SET, ASTM D-2850 Consist of : RS-600.1 Triaxial Compression machine (1 set) CD or UU & CU, capacity 300 kgf, loading speed 0.00 to 3.00 mm per minute, cell (speciment) size 35mm and 50mm maximum, Control power on-off switch, fast advanced selector swith. Variable speed, hand-operated and motorized operated with electric consumption 220V AC/ 200 W




alat alat laboratorium, alat teknik, mekanika teknik, mekanika tanah, mekanika batuan, mekanika beton, mekanika aspal, mekanika teknik, testing machine, alat lab teknik sipil, driling rig, general supplier, excavator, crusher, sondir, sieve shaker, hammer test, drying oven, test cbr,
alat lab teknik sipil, jual alat laboratorium teknik sipil

Harga Alat Ukur Dan Instrumen Triaxial Test Set

 : Rp75.000.000

SILAHKAN KONTAK KAMI

O81221826905

022- 20670083

JUAL JUAL LABORATORY CBR TEST SET (MANUAL )

JUAL LABORATORY CBR TEST SET 

( MANUAL )

LABORATORY CBR TEST SET 1 set

Consist of :
Mechanical Loading Machine 1 set
Steel frame, hand operated, two speeds,
10.000 lbs capacity.
CBR Mold 3 pcs
Machine steel, 6" i.d, 7" height,
2" height of collar.
Spacer Dish 1 pc
Machine steel, 5 15/16" dia, 2.416" height.
Cutting Edge 1 pc
Machine steel, sharp edge.
Circular Surcharge Weight 3 pcs
Machine steel, 5 7/8" dia 5 lbs weight.
Slotted Surcharge Weight 3 pcs
Machine steel, 5 7/8" dia 5 lbs weight.
Modified Proctor Hammer 1 pc
Machine steel, plated, 18" drop height,
10 lbs weight.
Filter Paper 1 box
6" dia., 100 sheets/box.
Proving Ring 1 set
6.000 lbs capacity.
Dial Indicator 1 pc
Range 0.01" x 1".
Square Pan 1 pc
Galvanized steel, 65 x 65 x 7.5 cm.
Thin Box 12 pcs
Alumunium, 60 gr capacity.
Graduated Cylinder 1 pc
Plastic, 1000 ml capacity.
Scoop 1 pc
Cast alumunium.
Trowel 1 pc
Pointed type.
Straight Edge 1 pc
300 mm length. 

JUAL CONSOLIDATION TEST SET ( info : 081-221-826-905 )

JUAL ALAT KONSOLIDASI TANAH

           ( info : 081-221-826-905 )

 CONSOLIDATION TEST SET

Using for determining of the consolidation characteristic of soil. Supplied complete with rigid construction to minimize distortion.
This set consist of:
Consolidation Frame 1 set
Consist of :
 Frame 1 set
Made of Alumunium casting, single table with two test unit.
 Loading Set 2 set
With three level arm alternative /loading Ratio : 1:9 , 1:10, 1:11
 Consolidometer 2 set
Brass made, 50,5mm sample dia, with 
Porous stone and loading capacity.
 Loading Plate 2 set
Consist of :
 Load, 500 gr 4 pcs
 Load, 1000 gr 2 pcs
 Load, 2000 gr 2 pcs
 Load, 4000 gr 2 pcs
 Load, 8000 gr 2 pcs
 Sample Tube 2 set
Complete with extruder, 65 mm dia, 20 mm height, machined steel, plated.
Dial Indicator 2 pcs
 Wire saw 1 pc
Weight approx. 90 kg

jual direct shear test

DIRECT SHEAR TEST

• This Hand Operated Direct Shear is using for determining of the shearing resistance of soil sample.
  This set consist of:
  Loading Machine 1 set
  Consist of :
  Frame, Hand Operated 1 pc
  Welded steel frame
  Loading Hanger 1 pc
  Machined Steel, galvanized. Supplied Without loads.
  Shear Box 1 set
  Made of costing alumunium, 63,5mm sample dia. Complete with porous stone and loading
  Capacity.
  Loading Plate 2 set
  Machined steel, galvanized, slotted.
  Consist of : Load, 3167 gr 2 pcs
  Load, 6334 gr 1 pc Sample Tube 1 set
  Machined steel, plated, 63.5 mm sample dia. Galvanized Complete with extruder. Proving Ring 1 pc
  100 kg cap Calibrated
  Dial Indicator 10 x 0.01 mm 1 pc
  Dial Indicator 30 x 0.01 mm 1 pc Wire Saw 1 pc
  Weight approx 155 kg.

slake durability test

slake durability test

REFERENCE

-Method for determination of slake durability index of rocks.

OBJECTIVE

This test is done to find out the resistance offered by a rock sample to weakening and disintegration when subjected to two standard cycles of drying and wetting in a slaking fluid usually water.

APPARATUS USED

NAME OF EQUIPMENT	CAPACITY	LEAST COUNT/ACCURACY
Balance	As per requirement
Slake durability test apparatus		—
Oven

SAMPLE PREPARATION

Test sample consist of minimum of 10 rock lumps, each weighing 40 to 60 g to give a total sample weight of 400 to 600 g. Rocks lumps should be spherical and corners of rock lumps should be rounded off during preparation.

PROCEDURE

1.   Dry the sample to constant mass by placing it in oven, maintained at a temp of 105±50C. Place the sample in the drum of the machine and record the weight of sample plus drum as ‘A’.

2.   Fit the lid with the drum; mount the drum in the trough.

3.   Fill the trough with slaking fluid to a level 20 mm below the drum axis. Rotate the drum at 20 rev/min for a period of 10 minutes.

4.   Remove the drum from trough and remove the lid from the drum.

5.   Dry the drum plus retained portion of the sample in an oven maintained at a temp of 105±50C.

6.   Record the weight of drum plus retained portion of the sample as ‘B’.

7.   Repeat the steps from 2 to 5 for a further period of 10 minutes. Record the weight of drum plus retained portion of sample as ‘C’.

8.   Clean the drum and record its weight as ‘D’.

CALCULATION

The slake durability index (2nd cycle) is calculated as percentage ratio of final to initial dry sample weight as follows.

Slake durability index (%), Id2 = ((C-D)/(A-D))*100

REPORT

The slake durability index is reported to the nearest 0.1%.

JUAL LAB VANE SHEAR

CV MEDIA SARANA TEKNIK 

 VANE SHEAR LAB

Part Name Specification Speed of rate 5 degree per minute 50/60 Hz, 220 Volt-AC, 50 Watt Maximum Shear Undrained (Su) 1Kg/cm2  Sensitivity  0.02 Kg/cm2  per division Vane size  12.5mm x 19mm, 19mm x 25.4mm and 25.4mm x 25.4mm Dimension  60 x 25 x 35 cm Gross Weight  55Kg

Uji geser laboratorium baling-baling untuk pengukuran kekuatan geser
tanah kohesif, berguna untuk tanah dengan kekuatan geser rendah kurang dari sekitar 0,5 kgf / cm2).
Tes ini memberikan kekuatan tanah yang tidak terdrainase dan yang tidak terganggu dan dibentuk kembali
kekuatan yang diperoleh digunakan untuk mengevaluasi sensitivitas tanah.

Alat uji geser baling-baling terdiri dari a
kepala torsi dipasang pada braket. Empat geser
baling-baling dipasang pada poros dan poros diperbaiki
di ujung bawah cakram bundar lulus
derajat. Pegas torsi dipasang di antara torsi
kepala dan disk bundar. Pointer maksimum
disediakan untuk memudahkan membaca 

sudut TORSI

CV.MEDIA SARANA TEKNIK  MENJUAL ALAT VANE SHEAR LAB SILAHKAN HUB Telp : (022)20670083 081221826905email : mst@alatujisipil.comatau kunjungi website kami di WWW.ALATUJISIPIL.COM